Waterproofing in Ulwe
Atlanta Waterproofing & Protective System takes on waterproofing and building restoration in Ulwe, under CIDCO in the MMR region. One of the newest nodes in the region, low-lying and largely built on made ground near the airport corridor.
What Ulwe actually needs
Low elevation and made ground mean below-grade work here is governed by a genuinely high water table. Box-type wrapping and working dewatering matter far more than the choice of surface coating.
The building stock here is principally very recent CIDCO node development, mid-rise residential towers, airport-corridor construction, mostly in the 3-15 years range. The recurring problems that follow are high water table on low-lying reclaimed ground, below-grade ingress in new basements, early-life joint failure in fast-built stock.
Municipal permissions and notices go through CIDCO rather than the BMC, and mobilisation is planned around the longer travel rather than assuming a crew can return the same day. That is the practical difference between working here and working in the island city.
What we can bring to a project here
- Terrace Waterproofing
Terrace waterproofing is the application of a continuous water barrier across a roof slab, laid to a fall so rainwater drains rather than ponds.
- Basement Waterproofing
Basement waterproofing protects a below-grade structure against groundwater under hydrostatic pressure.
- Bathroom Waterproofing
Bathroom waterproofing seals the sunk slab and wet-area walls so water from daily use cannot reach the flat below.
- Toilet Waterproofing
Toilet waterproofing seals the sunken slab, wall skirting and pipe penetrations of a WC area so water cannot migrate into the structure or the flat below.
- Brick Bat Coba Waterproofing
Brick bat coba is the traditional Indian terrace system: broken brick pieces bedded in waterproofed cement mortar, laid to a fall and finished with china mosaic or IPS.
- China Mosaic Waterproofing
China mosaic is a finish of broken glazed ceramic tile pieces set in waterproofed cement mortar over a terrace.
- APP Membrane Waterproofing
APP membrane is an atactic-polypropylene-modified bitumen sheet, torch-applied to a primed substrate with lapped and sealed joints.
- SBS Membrane Waterproofing
SBS membrane is a styrene-butadiene-styrene-modified bitumen sheet.
- HDPE Membrane Waterproofing
HDPE membrane waterproofing uses a high-density polyethylene sheet, generally pre-applied below rafts and against retaining walls before concrete is poured.
- TPO Membrane Waterproofing
TPO is a single-ply thermoplastic polyolefin membrane whose seams are hot-air welded rather than glued, producing a homogeneous joint as strong as the sheet.
- Polyurea Waterproofing
Polyurea is a spray-applied, fast-setting elastomeric coating that gels within seconds and forms a seamless, high-elongation, highly abrasion-resistant membrane.
- PU Grouting
PU grouting injects polyurethane resin under pressure into a leaking crack or joint.
Waterproofing in Ulwe — questions we get asked
What kind of buildings do you work on in Ulwe?
The stock here is principally very recent CIDCO node development, mid-rise residential towers, airport-corridor construction, mostly in the 3-15 years range. That shapes the work: high water table on low-lying reclaimed ground, below-grade ingress in new basements, early-life joint failure in fast-built stock.
Why does Ulwe leak the way it does?
Low elevation and made ground mean below-grade work here is governed by a genuinely high water table. Box-type wrapping and working dewatering matter far more than the choice of surface coating.
Is Ulwe treated differently from central Mumbai?
The engineering is the same; the logistics differ. Municipal permissions go through CIDCO rather than the BMC, travel from our Jogeshwari office is longer, and mobilisation is planned around that rather than assuming a same-day return. We say plainly at enquiry stage whether a job makes sense for us to take on.
Do you publish a technical diagnosis for Ulwe like your Mumbai pages?
Not to the same depth. For our 50 core Mumbai localities we publish measured rainfall, ward data, travel time and a locality-specific diagnosis, because we have the site experience to support it. For Ulwe we describe the area honestly and leave the detailed assessment to the inspection, rather than generating figures we have not verified.
Talk to us about a project in Ulwe
An engineer visits, finds the actual source, and tells you what the building needs and why. You get a clear scope before any money is discussed.
Mon–Fri 08:00–18:00 · Sat 09:00–16:00 · Jogeshwari West