Flooring & Finishing in Mumbai
Wearing surfaces and screeds that protect the waterproofing layer beneath and take the traffic. Atlanta Waterproofing & Protective System carries 2 systems in this category, selected by substrate, exposure and traffic rather than by habit. Each page below states when the system is right and when it is the wrong answer.
2 systems in this category
Chequered Tiles Work
Chequered tile work lays pressed cement tiles with a raised anti-skid pattern over a prepared bed, giving a hard, grippy wearing surface. On terraces and podiums the tiles are a protective and traffic layer over the waterproofing beneath, not a barrier in themselves..
IS 3067
IPS Screeding Work
IPS (Indian Patent Stone) screeding lays a cement-concrete topping, floated and finished to a hard, monolithic surface. On a terrace it creates the fall, protects the waterproofing beneath, and takes the traffic; internally it serves as a durable, economical floor..
IS 456 · IS 3067
The rest of what we do
- SEC. 01 / COATINGSCoating & Protective Systems
Liquid-applied protective and decorative systems that form a continuous barrier over concrete, masonry and steel.
- SEC. 02 / TRADITIONALTraditional & Specialised Waterproofing
Time-proven Indian terrace systems and high-performance specialist linings, from brick bat coba to polyurea.
- SEC. 03 / MEMBRANEMembrane Waterproofing Systems
Sheet-applied barriers — torch-on bitumen, heat-welded thermoplastic and pre-applied HDPE for below-grade work.
- SEC. 04 / AREAArea-Specific Waterproofing
System selection driven by where the water is: terrace, basement, wet area, tank, podium, lift pit, pool.
- SEC. 05 / GROUTINGLeakage Treatment & Grouting
Remedial injection and joint treatment that stops water already moving through a structure.
- SEC. 07 / RESTORATIONStructural & Restoration Works
Concrete repair, structural strengthening and facade renewal for ageing and distressed buildings.
Frequently asked
How do I choose between the systems in flooring & finishing?
Selection is driven by the substrate, the exposure, the traffic the surface will take, and whether the structure moves. Each system page below states plainly when that system is the right choice and — more usefully — when it is not. If you are unsure, a site inspection settles it in one visit.
Can these systems be combined?
Frequently, yes. Most real buildings need more than one: a terrace system with grouting to stop an active crack first, or a facade coating over repaired plaster. What matters is that the systems are chemically and mechanically compatible with each other and with the substrate.
Do you supply materials, or only apply them?
We supply and apply as a single scope, so responsibility for both material selection and workmanship sits in one place. Where a project specification names a particular manufacturer or product, we work to that specification.
Book the inspection. It costs nothing and it settles the argument.
An engineer visits, finds the actual source, and tells you what the building needs and why. You get a clear scope before any money is discussed.
Mon–Fri 08:00–18:00 · Sat 09:00–16:00 · Jogeshwari West